It is an Australian Standard (AS) requirement that all fire equipment is serviced at regular intervals. By servicing fire equipment, if the need arises, the equipment will be ready for immediate use.
Essential Safety Measures may include:
When the construction of a building is complete, it is the owner’s responsibility to ensure that the safety features installed in Class 2 – 9 buildings are maintained on a regular basis.
The building’s Certificate of Occupancy will detail the Essential Services of the building that require regular maintenance the frequency of that maintenance and the service required.
If you’re unsure of what Essential Safety Measures are required to be maintained in your building, contact our Service Department on 1300 004 014. We can arrange a site inspection to identify what is required to be maintained, and provide a detailed quotation for ongoing maintenance of your Essential Safety Measures.
The Exit and Emergency Lights must be tested every 6 months. All exit and emergency light fittings come with an internal battery to provide backup power supply if there is a power outage.
The test involves switching off the power circuit to the Exit and Emergency lighting system, then running the lights off their internal power source. The test lasts 90 minutes. If any of the light fittings fail the 90 minute test, we will provide a quotation to repair or replace the light fittings (see information leaflet for more information).
A requirement of AS 1851-2012 is to provide a service report for all servicing or testing for the property.
We provide all our clients with a clear, informative service report displaying the asset location, whether it passes or fails and any comments or recommended repairs required.
We also provide an inspection logbook that notes every attendance by our service technicians.
When your building has been completed, the builder or developer will provide a warranty period for the first 12 months. This covers all fire equipment installed in the building.
After the warranty period has expired, a Fire contractor is required to maintain the new equipment to Australian Standards (AS) 1851-2012. It is the responsibility of the Owner to engage a Fire technician to maintain the fire prevention systems that have been installed.
It is a recommendation of the Australian Standards, and the Fire Brigade that only trained personnel such as a Fire service technician carry out isolations of the Fire Indicator Panel.
Isolations can be tricky, and rely on trained fire service technicians to isolate a zone, detector or other part of the fire monitoring system. Isolating the wrong part of the system may render the fire system useless if there is a fire or emergency situation. You may also find that the building insurance will not cover for incidents such as these.
Call DMR if you require an isolation to be done?
The building’s occupancy certificate determines how often fire equipment is required to be tested. Wherever possible, the most recent version of the Australian Standard (AS) 1851 is used for determining the frequency of service intervals.
Currently, (AS) 1851-2012 Amendment 1, has been adopted for use.
Have you ever heard the promotion when Daylight savings occurs “change your clock and change your smoke alarm battery” ? This was an initiative to remind people when daylight savings starts, to change the battery on the smoke alarm.
Smoke Alarms do save lives. Unless, the battery installed is missing, or out of date. If there is a 240 volt or 9 volt smoke alarm installed then the battery must be replaced every 12 months.
Smoke alarms work best if they are serviced. We remove or detach the smoke alarm from its base, wipe down the entire alarm with cleaning wipes, then install a new battery. The alarm is then re-attached to its mounting base, then tested with test smoke to ensure it’s ready for use. Should the alarm fail the smoke test, we will supply a quotation for replacement.
We recommend that any gas heaters installed in apartments have a Carbon Monoxide detector. Carbon Monoxide can be described as a silent killer, as it is an odourless and tasteless gas and difficult to detect without the installation of a detector.
A slight leak from a gas appliance can creep into the atmosphere without anyone knowing. The detector determines when there is the presence of CO gas in the atmosphere, alerting the occupier before it’s too late.
DMR can supply and install CO detectors. Contact our Service Department for further information.
Like Fire Extinguishers, Fire Hydrants are required to be tested every 6 months. The hydrant is water flow tested annually to ensure it meets the required standards when the building was certified.
The Hydrant system is pressure tested every 5 years to ensure there are no leaks within the system.
If there is a hose reel leaking, contact our service department on 1300 004 014. We will send a technician to investigate the issue. If we can not fix the Hose Reel while on site, we can provide a quotation to repair or replace it.
At the top of the fire extinguisher there is a gauge that shows if the fire extinguisher is charged (in the green) or requires re-charging (red). If the needle points in the red, the Fire Extinguisher is in need of recharging.
If you’re not sure, please contact our service department on 1300 004 014. We can send a Technician out to your premises to inspect and service your fire extinguishers.
All commercial kitchens such as those in Restaurants and café’s require at least a 1.2m x 1.8m Australian Standards (AS) approved Fire Blanket to be installed on the wall adjacent to the cooktop. We recommend that any kitchens in tenancies or business kitchenette’s have a fire blanket at the ready when using a cooktop.
Stove fires are quite common in residential kitchens. Stove fires are never extinguished with water, as the water will only make the fire bigger, possibly leading to severe burns. A fire blanket placed over a burning stove will smother the fire, preventing the fire from spreading.
For small residential kitchens, a 1m x 1m fire blanket is recommended.
DMR sell a range of fire blankets. Contact our Service Department on 1300 004 014 for further information.
It is the responsibility of the Employer that employees are safe in their workplace. Not only employees, but contractors, visitors and customers are expected to feel safe when attending your place of business. In an emergency situation, the need to safely evacuate people relies solely on the Employer to provide a safe evacuation from the building to a designated area.
To provide a safe evacuation, an Evacuation plan is installed throughout the building. Most buildings have an Evacuation Plan installed at an emergency exit door.
A block plan displays the locations of the fixed fire equipment installation of the building. There are typically two types of Block Plan installed. A Sprinkler Block Plan, and a Hydrant System Block Plan.
Sprinkler Block Plan
It is a requirement of Australian Standards (AS) 2118 that a block plan be installed at the sprinkler control and test valve assembly. The Sprinkler Block Plan displays the location of the sprinkler isolation and test valves, and any other information required in an emergency situation.
The Hydrant block plan
It is the requirement of Australian Standards 2419 that a block plan be installed at the main booster connection at the front of the building. The block plan identifies all hydrants, including the booster system, on site and any isolation valves installed.
If you require a block plan, contact our Service Department on 1300 004 014 for further information.
If you’re unsure if all the Essential Safety Measures are being maintained, contact our Service Department on 1300 004 014 for an inspection. We can tailor a service package to meet your needs.
Mechanical Ventilation Systems are a specialist area that requires highly trained personnel to inspect and maintain these systems to Australian Standards. Fire Services Contractors typically work hand and hand with Mechanical Ventilation service providers to ensure all the safety aspects of the Ventilation and Mechanical Services work in the correct manner where these systems communicate with the Fire Alarm System.
Never touch the Fire Indicator Panel unless instructed to do so by a qualified Fire Service Technician or the Fire Brigade. Contact the Service Department Immediately on 1300 004 014. We are available 24 hours a day.
All service logbooks should be kept in a designated area in an Essential Services Logbook Cabinet. We recommend that an Essential Services Logbook Cabinet be installed at the main entry of the building.
If a phone line is installed to provide communication to the Fire Brigade Monitoring Device from the Fire Indicator Panel, or to provide emergency communications in a lift, it’s the building owner’s responsibility to maintain the phone line connection from the Building Entry Point, or the Main Distribution Frame (MDF).
Recently, there has been a requirement to upgrade the existing copper phone line connection to the NBN. It is solely the Building Owner’s responsibility, not the Fire Contractor to ensure the changeover is completed
Yes – It is a requirement of all Fire Service Technicians to display their identification while on a property completing testing or maintenance tasks.
If there is an after hours emergency that requires the services of a Fire Services Technician, we can be contacted 24 hours a day, 7 days a week on 1300 004 014.
If there is a fire or emergency situation that requires the attendance of the Fire Brigade, Ambulance or Police, please ensure you phone 000.
If you require any further assistance please call The DMR Service Department on 1300 004 014 24/7
Download important fire protection maintenance service documents from DMR, providing fire equipment maintenance and servicing in Melbourne and across regional Victoria.
Example Service Report
FPA Fire Extinguisher selection guide
FPA Guide to Evacuation Diagrams – AS 3745-2010, Planning for emergencies in facilities
Handbook – Upgrading existing buildings
Handbook – Lifts used during evacuations
As a leader in fire equipment servicing and maintenance in Melbourne, DMR Fire Protection sets the standard for fire prevention and safety in the city’s commercial and domestic buildings. DMR Fire Protection understands better than most the responsibilities building owners and managers have to their tenants and extends that same duty of care to its fire protection clients. With a range of advanced fire-prevention and protection services to ensure properties abide and comply with the Building Commission’s Essential Safety Measures, DMR Fire Protection is committed to providing unequalled fire protection services.
From the largest industrial sites and commercial complexes through to apartment blocks and residential facilities, DMR Fire Protection’s team of highly qualified and skilled technicians deliver unparalleled fire equipment servicing and maintenance. Matching knowledge and skills with state-of-the-art technology, DMR Fire Protection provides advanced fire equipment maintenance services which ensure fire prevention, fire detection and fire suppression systems are working as they should and comply with Australian Standards and the Building Codes of Australia.
Emergencies can arise at any hour of the day, which is why DMR Fire Protection delivers prompt 24-hour emergency support, seven days a week, 356 days of the year. In the event of an emergency, DMR Fire Protection technicians will be on site in the shortest possible time to service, reset and test fire protection equipment, check the extent of damage and repairs and provide peace of mind to owners and occupants. If alarm isolation is required, DMR Fire Protection ensures the isolation causes minimal disruption to protection services.
DMR Fire Protection and its team of A Class electricians provide a range of electrical services to install, maintain, upgrade and repair fire protection equipment. DMR Fire Protection technicians have Electrical Fire Protection Control Systems certification and their work ensures that should fire break out, fire protection equipment resources will activate and respond promptly and appropriately. From identifying and repairing faults to installing and wiring the latest technology, DMR Fire Protection is an industry leader.
DMR Fire Protection technicians inspect and test fire protection equipment to confirm that protective devices and systems are working properly and will respond appropriately should fire occur. DMR Fire Protection’s fire equipment and system testing is in line with Australian Standards AS1851-2012 and ranges from testing fire alarms and smoke detectors, through to fire hose and sprinkler testing and testing evacuation procedures. DMR Fire Protection will work with building owners and managers to organise regular fire equipment and system checks.
Appropriate fire protection begins with the supply and installation of the most suitable fire protection equipment and systems for specific circumstances. DMR Fire Protection’s engineers and technicians will recommend, supply and install the most appropriate fire protection for individual situations. From fire extinguishers, fire blankets and fire and smoke alarms through to sprinklers, pumps, fire hoses and thermal detectors, trust DMR Fire Protection to recommend, supply and install the equipment your building and its occupants need.
DMR Fire Protection has tailored reporting solutions for building owners obliged to maintain records and log books to comply with Building Codes of Australia regulations. DMR Fire Protection uses state-of-the-art recording technology for its fire protection services, meaning clients have swift and easy access to comprehensive but easy-to-read online reports. As well, DMR Fire Protection will also maintain fire protection equipment logbooks, ensuring they are on site, up to date and comply with all legislative requirements.